System Management
Basic System Configuration Guide 553
Context clear
Description This command allows an operator to clear system information.
ptp
Syntax ptp
Context clear>system
Description This command enables the context to clear Precision Timing Protocol (PTP) information on the 7450
ESS and 7750 SR.
inactive-peers
Syntax inactive-peers
Context clear>system>ptp
Description This command clears inactive peer information on the 7450 ESS and 7750 SR.
peer
Syntax peer ip-address [router router-instance] statistics
Context clear>system>ptp
Description This command clears PTP peer information on the 7450 ESS and 7750 SR.
Parameters ip-address — Clears information that specific to the address of the PTP 1588 peer.
router router-instance — Clears information that is specific to a virtual router instance.
statistics — Clears statistics information of the specified IP address.
port
Syntax port port-id statistics
Context clear>system>ptp
Description This command clears PTP port information on the 7450 ESS and 7750 SR.
Parameters port port-id — Clears the specified port ID.
statistics — Clears statistics information of the specified port ID.
To Next Page
Loading...
