ALIBI ALI-DVR1004E 960H - Appendix Bfaq

102
APPENDIXB FAQ
Q Why does my DVR make a beeping sound after booting?
A The possible reasons for the warning beep are:
a. There is no HDD installed in the DVR.
b. The HDD is not initialized.
c. HDD error
To cancel the beeping sound and use the DVR without HDD, open the Conguration | Exception menu and de-select the
Audible Warning.
Q Why is there no video recorded after setting the motion detection?
A If there are no recorded video after setting the motion detection, please check the guidelines in Chapter 5.
a. The recording schedule is setup correctly. See Menu | Record | Schedule.
b. The motion detection area is congured correctly. See Menu | Cameras | Motion.
c. The channels are being triggered for motion detection. See Menu | Cameras | Motion, check the Enable Motion
Detection option, the Sensitivity setting, motion detection zones.
Q Why doesn’t the DVR detect my USB export device for exporting recorded les?
A There’s a chance that the DVR and your USB device is not compatible. Please refer to our company’s website to view a list of
compatible devices.
APPENDIX B: FAQ