ALIBI ALI-DVR1004E 960H - Configuring Multicast; Configuring RTSP

72
5. Click Apply to save your settings and close the menu.
7.1.3 ConguringMulticast
Using the multicast function, more than 64 cameras are connectable. A multicast address spans the Class-D IP range of 224.0.0.0 to
239.255.255.255. We recommended that you use the IP address range from 239.252.0.0 to 239.255.255.255.
1. Enter the Network Settings interface. Go to Menu | Conguration | Network
2. Click the More Settings tab to open the More Settings menu.
3. Set the Multicast IP address. When adding a device to the Network Video Surveillance Software, the multicast address must be
the same as the DVR’s multicast IP.
4. Click Apply to save your settings and close the menu.
NOTE
The multicast function must be supported by the network switch to which the DVR is connected.
7.1.4 ConguringRTSP
The RTSP (Real Time Streaming Protocol) is a network control protocol designed for use in communication systems to control
streaming media servers.
1. Open the Network Settings menu. Go to Menu | Conguration | Network
SECTION 7: NETWORK SETTINGS