ALIBI ALI-DVR1004E 960H - Configuring Record Settings; Setting Camera Encoding Parameters

32
5.1 Conguring record settings
5.1.1 Settingcameraencodingparameters
1. Enter the Record settings interface to congure the encoding parameters. Go to Menu | Encoding | Record
2. Select the Record tab page you want to congure. You can congure the stream type, the resolution, and other parameters.
— Pre-record: The length of time you set to record before the scheduled time or event. For example, when an alarm
triggered the recording at 10:00, if you set the pre-record time as 5 seconds, the camera records it at 9:59:55.
— Post-record: The length of time you set to record after the event or the scheduled time. For example, when an alarm
triggered the recording ends at 11:00, if you set the post-record time as 5 seconds, it records till 11:00:05.
— Expired Time: The expired time is the longest time a recording is kept on the HDD. If the deadline is reached, the le
will be deleted. If you set the expired time to 0, the le will not be deleted. This parameter is usually determined in
consideration of the capacity of the HDD.
— Record Audio: Check the checkbox to enable audio recording.
3. Click Apply to save your new conguration settings.
4. Open the Sub-stream tab page.
SECTION 5: RECORD, PLAYBACK AND VIDEO BACKUP