Allen-Bradley CompactLogix Series User Manual

126 Publication IASIMP-QS001C-EN-P - October 2009
Chapter 11 Add Distributed I/O Modules to the Project
15. Verify that Automap on Add is checked
and click Apply.
16. Click Yes.
Click OK.
17. Save the configuration file.
You will use this file to Create DeviceNet
Tags and Add Ladder Logic later in this
chapter.
18. Close RSNetworx for DeviceNet software.

Allen-Bradley CompactLogix Series Specifications

General

Brand	Allen-Bradley
Model	CompactLogix Series
Category	Controller
Language	English