Allen-Bradley powerflex 700 Installation Instructions

Rockwell Automation Publication 20B-IN026C-EN-P - October 2015 75
Inverter Assembly Component Replacement Procedures Chapter 3
9. Secure the resistor wire bundle below the assembly using tie-wraps (as
shown in the following image).
10. Install the stacking panel as detailed on page 26
.
11. Replace all safety shields and enclosure covers before applying power to the
drive.

Allen-Bradley powerflex 700 Specifications

General

Series	PowerFlex 700
Category	AC Drive
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC
Enclosure	Type 1
Control Method	Sensorless Vector
Communication	EtherNet/IP, ControlNet, DeviceNet, PROFIBUS DP, Modbus