Allen-Bradley powerflex 700 Installation Instructions

Rockwell Automation Publication 20B-IN026C-EN-P - October 2015 93
Appendix A
History of Changes
This appendix summarizes the revisions to this manual. Reference this appendix
if you need information to determine what changes have been made across
multiple revisions. This may be especially useful if you are deciding to upgrade
your hardware or software based on information added with previous revisions of
this manual.
20B-IN026B-EN-P, July 2013
Topic
Updated the Component Kits table with the new balancing resistor kit catalog numbers.
Updated Figure 2 - Frame 10 Assembly Busbar Locations to include the new balancing resistor bus
bar assembly.
Updated the Balancing Resistor and DC+ Bus Bar instructions for removing and installing the new kit.

Allen-Bradley powerflex 700 Specifications

General

Series	PowerFlex 700
Category	AC Drive
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC
Enclosure	Type 1
Control Method	Sensorless Vector
Communication	EtherNet/IP, ControlNet, DeviceNet, PROFIBUS DP, Modbus