Allen-Bradley powerflex 700 Installation Instructions

Rockwell Automation Publication 20B-IN026C-EN-P - October 2015 9
Preface
Introduction
This publication provides guidelines for replacing the major components in the
PowerFlex 700 Frame 10 drive.
The PowerFlex 700 Frame 10 drive is available in AC input and DC input. AC
input drives ship as two separate units (inverter and converter) that must be
connected when installed on site, and DC input drives ship as one unit (inverter).
Overview on page 15
for more details.
The PowerFlex 700 Frame 10 drive is available in two enclosure types:
• IP00, NEMA/UL Type Open
• IP20, NEMA/UL Type 1
The IP00 enclosure type is shown in most visual aids throughout the manual.
Any component replacement information specific to the IP20 enclosure type is
noted as IP20 version only.
889.0
(35.00)
Inverter Assy. Converter Assy.
1267.7
(49.91)
757.7
(29.83)
503.7
(19.83)
2373.9
(93.46)
120
IN1
120
IN2
3
4
5
6
DC+
DANGER
DANGER
DANGER
TB9
8 AMPERES RMS
MAXIMUM
120
IN1
120
IN2
3
4
5
6
VWU
TB11
PE
25 AMPERES RMS
MAXIMUM
GND
RISK OF SHOCK
REPLACE AFTER
SERVICING
!
DANGER
RISK OF SHOCK
REPLACE AFTER
SERVICING
!
DANGER
RISK OF SHOCK
REPLACE AFTER
SERVICING
!
DANGER
TB10
8 AMPERES RMS
MAXIMUM
120
IN1
120
IN2
3
4
5
6
TB10
8 AMPERES RMS
MAXIMUM
GND
RISK OF SHOCK
REPLACE AFTER
SERVICING
!
DANGER
543.1
(21.38)
Inverter Assy.
IP00, NEMA/UL Type Open IP20, NEMA/UL Type 1
Converter Assy.
1267.7
(49.91)
757.7
(29.83)
503.7
(19.83)
2275.8
(89.60)
475
(18.7)
252.7
(9.95)
445.8
(17.55)
353.8
(13.93)
591.3
(23.28)
All dimensions are in millimeters and (inches).

Allen-Bradley powerflex 700 Specifications

General

Series	PowerFlex 700
Category	AC Drive
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC
Enclosure	Type 1
Control Method	Sensorless Vector
Communication	EtherNet/IP, ControlNet, DeviceNet, PROFIBUS DP, Modbus