11 Publication 1752-UM001A-EN-P - October 2006
Preface
Read this preface to familiarize yourself with the rest of the manual. It
provides information concerning:
• who should use this manual.
• the purpose of this manual.
• related documentation.
• conventions used in this manual.
• terminology used in this manual.
Who Should Use This
Manual
Use this manual if you are responsible for designing, installing,
programming, or troubleshooting control systems that use
SmartGuard 600 controllers.
You must have a basic understanding of electrical circuitry and
familiarity with relay logic. You must also be trained and experienced
in the creation, operation, and maintenance of safety systems.
Purpose of This Manual
This manual is a guide for using SmartGuard 600 controllers. It
describes the specific procedures you use to configure, operate, and
troubleshoot your SmartGuard 600 controller.
Additional Resources
The table below provides a listing of publications that contain
important information about SmartGuard 600 controller systems.
If you would like a manual, you can:
• download a free electronic version from the Internet at
http://literature.rockwellautomation.com
.
• purchase a printed manual by contacting your local
Allen-Bradley distributor or Rockwell Automation sales office.
For Read This Document Publication
Information on installing the SmartGuard 600 controller SmartGuard 600 Controller Installation Instructions 1752-IN001
Detailed requirements for achieving and maintaining SIL 3
with the SmartGuard controller system
SmartGuard Controllers Systems Safety Reference
Manual
1752-RM001
Information on installing Guard I/O DeviceNet Safety modules DeviceNet Safety I/O Installation Instructions 1791DS-IN001
Information on using Guard I/O DeviceNet Safety modules Guard I/O DeviceNet Safety Modules User Manual 1791DS-UM001
To Next Page
Loading...
Need help?
General
