Allen-Bradley SmartGuard 600 User Manual

13 Publication 1752-UM001A-EN-P - October 2006
Chapter 1
Overview
Introduction
About the SmartGuard 600
Controller
The SmartGuard 600 controller is a programmable electronic system
featuring 16 digital inputs, 8 digital outputs, 4 test pulse sources, and
connections for USB and DeviceNet communications. The
SmartGuard 600 controller supports both standard and CIP Safety
communications over DeviceNet networks. The SmartGuard 600
controller is certified for use in safety applications up to and including
Safety Integrity Level (SIL) 3, according to IEC 61508, and Category
(CAT) 4, according to EN 954-1.
SmartGuard 600 Controller Safety Control System Example
Topic Page
About the SmartGuard 600 Controller 13
Safety Concept of the Controller 17
Additional Resources 17
1 The SmartGuard 600 controller executes safety logic operations and controls local
safety I/O.
2 As a DeviceNet safety master, the controller also controls remote CIP Safety I/O
slaves on the DeviceNet network.
As a DeviceNet safety slave, the controller can perform safety interlocking with
another CIP Safety master.
3 As a DeviceNet standard slave, the SmartGuard 600 controller communicates with a
DeviceNet standard master.
1
3
2
SmartGuard
Controller
Standard Slave
Non-safety Control
Safety Control
Standard Controller
DeviceNet Safety I/O
Safety Slave
DeviceNet
Network
RSNetWorx for DeviceNet
Software
MS
NS
LOCK
COMM
NODE ADR
x10 x1
USB
SERVICE
BAUD RATE
24VDC
V0V0 G0 G0
00
O
N
1
2
3
4
OUT
IN
IN
24VDC
V1 G1 T0 T2
V2 G2 T1 T3
0246
1357
8101214
9111315
024 6
135 7
0246
1357
0246
1357
8101214
9111315
Smart
600

Allen-Bradley SmartGuard 600 Specifications

General

Brand	Allen-Bradley
Model	SmartGuard 600
Category	Controller
Language	English