viii
c) P
rohibit any use of fire in the
shop, and install a fire
extinguisher or other fire
control device near the
machine when cutting
titanium, magnesium, or any
other material that produces
flammable chips. Never
leave the machine unattended
when cutting flammable
materials.
d) Never cut on this machine
carbon or any other material
that produces and disperses
explosive dust. Sparks from
motors and other machine
parts may ignite and explode
the air-borne dust.
The machine needs special
measures for cutting explosive
materials (for details, consult
AMADA).
e) Confirm that the area around
the machine is cleared of
people and obstacles every
time before starting the
machine or operation.
To Next Page
Loading...
