Ametek SEQUOIA Series Programming Manual

Sequoia Series 135
SYSTem:COMMunicate:SERial:BITS
This command will set the SERial communication number of data bits.
Command Syntax SYSTem:COMMunicate:SERial:BITS <NRF>
Parameters 7 | 8
Example SYST:COMM:SER:BITS 8
Returned Parameters <NR1>
SYSTem:COMMunicate:SERial:SBITs
This command will set the SERial communication number of stop bits.
Command Syntax SYSTem:COMMunicate:SERial:SBITs <NRF>
Parameters 1 | 2
Example SYST:COMM:SER:SBITs 1
Returned Parameters <NR1>

Ametek SEQUOIA Series Specifications

General

Brand	Ametek
Model	SEQUOIA Series
Category	Portable Generator
Language	English