Sequoia Series 207
DO160:STANdard
This command will select the proper standard. The standard selection must be verified prior to any
test selection. Airbus standard is the same as the European standard with the exception of nominal
voltage modulation.
Command Syntax DO160:STANdard
Parameters <RTCA|EURocae|AIRBus>
Examples DO160:STAN RTCA
Query Syntax DO160:STAN?
DO160:GROup
This command is used to select equipment Group 1, 2 or 3. It is only valid with the EUROCAE
standard.
Command Syntax DO160:GROup <NR1>
Parameters 1 through 3
Examples DO160:GROup 2
Query Syntax DO160:GRO?
To Next Page
Loading...
Need help?
General
