Ametek SEQUOIA Series Programming Manual

Sequoia Series 45
4.2.14 ADC
CALibration :VOLTage[:AC] :LROFset <NRf>
This command will result in the ADC calibration coefficient being calculated for the AC full scale output
voltage in the low range.
Command Syntax CALibration:VOLTage:LROFset <NRf>
Parameters <NRf> (value from 0 to 65535)
Examples CAL:VOLT:LROF 35000
Query Syntax CAL:VOLT:LROF?
Returned Parameters <NRf> (value from 0 to 65535)
CALibration :VOLTage[:AC] :HROFset <NRf>
This command will result in the ADC calibration coefficient being calculated for the AC full scale output
voltage in the high range.
Command Syntax CALibration:VOLTage:HROFset <NRf>
Parameters <NRf> (value from 0 to 65535)
Examples CAL:VOLT:HROF 35000
Query Syntax CAL:VOLT:HROF?
Returned Parameters <NRf> (value from 0 to 65535)
CALibration :VOLTage:DC:LROFset <NRf>
This command will result in the ADC calibration coefficient being calculated for the DC full scale output
voltage in the low range.
Command Syntax CALibration:VOLTage:DC:LROFset <NRf>
Parameters <NRf> (value from 0 to 65535)
Examples CAL:VOLT:DC:LROF 35000
Query Syntax CAL:VOLT:DC:LROF?
Returned Parameters <NRf> (value from 0 to 65535)
CALibration :VOLTage:DC:HROFset <NRf>
This command will result in the ADC calibration coefficient being calculated for the DC full scale output
voltage in the high range.
Command Syntax CALibration:VOLTage:DC:HROFset <NRf>
Parameters <NRf> (value from 0 to 65535)
Examples CAL:VOLT:DC:HROF 35000
Query Syntax CAL:VOLT:DC:HROF?
Returned Parameters <NRf> (value from 0 to 65535)
CALibration :CURRent[:AC] :LROFset <NRf>
This command will result in the ADC calibration coefficient being calculated for the AC full scale output
current in the low range.

Ametek SEQUOIA Series Specifications

General

Brand	Ametek
Model	SEQUOIA Series
Category	Portable Generator
Language	English