68 Sequoia Series
Command Syntax OUTPut:DFI[:STATe]<bool>
Parameters 0|1|OFF|ON
*RST Value OFF
Examples OUTP:DFI 1 OUTP:DFI OFF
Query Syntax OUTPut:DFI[:STATe]?
Returned Parameters 0 | 1
Related Commands OUTP:DFI:SOUR
OUTPut:DFI:SOURce
This command selects the source for DFI events. The choices are:
QUEStionable Questionable summary bit
OPERation Operation summary bit
ESB Standard Event summary bit
RQS Request Service summary bit
OFF Never true
Command Syntax OUTP:DFI:SOUR<source>
Parameters QUES | OPER | ESB | RQS | OFF
*RST Value OFF
Examples OUTP:DFI:SOUR OPER
Query Syntax OUTPut:DFI:SOUR?
Returned Parameters <CRD>
Related Commands OUTP:DFI
OUTPut:PON[:STATe]
This command selects the power-on state of the power source. The following states can be selected:
RST Sets the power-on state to *RST. Refer to the *RST command as described later in this chapter
for more information.
RCL0 Sets the power-on state to *RCL 0. Refer to the *RCL command as described later in this
chapter for more information.
Command Syntax OUTPut:PON[:STATE] <state>
Parameters RST | RCL0
Examples OUTP:PON:STAT RST
Query Syntax OUTPut:PON:STATe?
Returned Parameters <CRD>
Related Commands *RST *RCL
To Next Page
Loading...
Need help?
General
