Rev. 2 xi
Foreword
Purpose and Scope
This manual contains the operation and maintenance instructions for the
American Magnetics, Inc. Model 1700 Liquid Level Control Instrument
and outlines applications for various system configurations. Since it is not
possible to cover all equipment combinations for all magnet systems, only
the most common configurations are discussed. The user is encouraged to
contact an authorized AMI Technical Support Representative for
information regarding specific configurations not explicitly covered in this
manual. This manual refers to the instrument as configured for liquid
nitrogen operation.
Contents of this Manual
Introduction describes the functions, specifications, and characteristics
of the Model 1700 Instrument. It provides illustrations of the front and
rear panel layouts as well as documenting the performance specifications.
Additional information is provided in the form of system block diagrams.
Installation describes how the Model 1700 Instrument is unpacked and
installed in conjunction with ancillary equipment in typical systems.
Block-level diagrams document the interconnects for various system
configurations.
Operation describes how the Model 1700 Instrument is used to monitor
and automatically control liquid nitrogen levels.
Calibration describes the various calibration techniques for liquid
nitrogen level sensors.
Remote Interface Reference documents all remote commands and
queries available through the Model 1700 Instrument RS-232 and
Ethernet interfaces. A quick-reference summary of commands is provided
as well as a detailed description of each.
The Appendix and Glossary sections support the information in the
sections listed above. See the Appendix section when referenced from other
sections. See the Glossary for any words or acronyms presented in the
above sections, requiring a more complete understanding.
To Next Page
Loading...
