AMI 1700 - Commands for Making Liquid Level Measurements

Rev. 2 73
Remote Interface Reference
Command Set Reference : Measuring Level
5.5.5 Commands for making liquid level measurements
Command: LEVEL
Function: Returns the liquid nitrogen or helium level in the current units.
Returns: <value><CR><LF>
Default: N/A
Command: MEASure:N2:LEVel?
Function: Returns the liquid nitrogen level in the current units.
Returns: <value><CR><LF>
Default: N/A
Command: MEASure:N2:PERIod?
Function: Returns the liquid nitrogen level measurement period in microseconds.
Returns: <value><CR><LF>
Default: N/A