AMI 1700 - Closed Dewar Calibration Procedure; Presetting Calibration Points

Rev. 2 35
Operation
Using the Model 1700 Menus
sensor cannot be used again until all the alcohol has been evaporated.
Under no circumstances should the sensor be disassembled.
For sensors to be used with liquid oxygen (LOX), although measures are
taken to minimize oils and greases during manufacture, no special clean-
ing required for LOX service is provided by AMI. Certified LOX cleaning is
the responsibility of the customer.
3.10.2 Resetting the Instrument to Factory Defaults
1. Press MENU, then SYSTEM, then PAGE 2.
2. Press RESET INSTRUMENT TO
FACTORY DEFAULTS.
3. Press RESET and the
instrument will be reset to
factory defaults.
Figure 3-28. System Menu, Page 2
Figure 3-29. Resetting Instrument to
Factory Defaults