AMI 1700 - Service and Repair; Cleaning; User Replaceable Parts

Rev. 2 79
6 Service and Repair
6.1 Cleaning
To prevent electrical shock, disconnect the instrument from AC mains
power and disconnect all connected wiring before cleaning. Clean the out-
side of the instrument using a soft, lint-free, cloth slightly dampened with
water.
Do not use detergent or solvents.
Do not attempt internal cleaning.
6.2 User Replaceable Parts
Replacement parts for the instrument are listed in the table below.
AMI Part Number Description
HG0128 Instrument foot
SA 1045 Single Rack Mount Kit
SA 1046 Dual Rack Mount Kit
EF1700 Fuse, 3 A, 250 Vac, 5x20 mm, fast acting, UL/CSA
recognized.
HG0005 Battery, 3V lithium, 20mm x 3.2 mm coin cell; CR2032.