Rev. 2 77
Remote Interface Reference
Command Set Reference : Calibration Functions
-6
Invalid argument, value out of
maximum calibration range
1 cm
value 650 cm
-7
INTERVAL setting out of range
0
INTERVAL 600 min
-8 Unrecognized command
-9
Invalid argument, value was negative
or non-numeric
-10
Approximate calibration factor out of
range
0.1
factor 999.9
-11
Command exceeds SCPI input buffer
limit
256 characters, including spaces,
etc.
a. Applies to dual instrument configuration
Error
Code Meaning Valid Range
To Next Page
Loading...
