CalibrationCalibration The performance-guarantee seal verifies the integrity of the equipment. To
ensure the continued integrity of the equipment, only Anritsu service
personnel, or service personnel of an Anritsu sales representative, should
break this seal to repair or calibrate the equipment. Be careful not to break the
seal by opening the equipment or unit covers. If the performance-guarantee
seal is broken by you or a third party, the performance of the equipment
cannot be guaranteed.
Battery FluidBattery Fluid DO NOT short the battery terminals and never attempt to disassemble the
battery or dispose of it in a fire. If the battery is damaged by any of these
actions, the battery fluid may leak.
This fluid is poisonous.
DO NOT touch the battery fluid, ingest it, or get in your eyes. If it is
accidentally ingested, spit it out immediately, rinse your mouth with water and
seek medical help. If it enters your eyes accidentally, do not rub your eyes,
rinse them with clean running water and seek medical help. If the liquid gets
on your skin or clothes, wash it off carefully and thoroughly with clean water.
LCDLCD This equipment uses a Liquid Crystal Display (LCD). DO NOT subject the
equipment to excessive force or drop it. If the LCD is subjected to strong
mechanical shock, it may break and liquid may leak.
This liquid is very caustic and poisonous. DO NOT touch it, ingest it, or get in
your eyes.
If it is ingested accidentally, spit it out immediately, rinse your mouth with
water and seek medical help. If it enters your eyes accidentally, do not rub
your eyes, rinse them with clean running water and seek medical help. If the
liquid gets on your skin or clothes, wash it off carefully and thoroughly with
soap and water.
To Next Page
Loading...
