33..11 Touch Screen DisplayTouch Screen Display
The 9 inch active TFT display with WVGA resolution (800x480 pixels) is used
for setups and for presentation of results (that is, for all interaction with the
instrument). As the display includes touch screen functionality, it is possible to
navigate and operate directly from it.
The touch screen display is constructed to be operated by the tip of your finger
or by the included
Stylus
(Anritsu part No. Z1746A). The touch screen surface
is made of delicate material and is easily scratched or damaged if handled
incorrectly.
CAUTIONCAUTION
Never expose the touch screen to excessive pressure as this may damage itsNever expose the touch screen to excessive pressure as this may damage its
functionality.functionality.
Never use sharp objects (e.g. pens, paper clips etc.) to operate Never use sharp objects (e.g. pens, paper clips etc.) to operate the touchthe touch
screen, as this may damage the surface.screen, as this may damage the surface.
Only use a soft cloth moisturized with a mild detergent to clean the surface of
the touch screen. Be sure to power off and disconnect AC adapter.
To Next Page
Loading...
