Once a measurement ended, Measurement end time appears right-hand in
Navigation area.
Time display after a measurement ended
In addition to the results, whose presentation varies from application to
application, the Test resultsTest results screen also contains the Application toolbar and
the navigation tabs for horizontal and vertical navigation.
44..11..44 Lamp Indication of Alarm/Error StatusLamp Indication of Alarm/Error Status
Alarm and error status is indicated by colored Lamp icons. The following
colors are used:
Red Lamp icon indicates that an alarm has appeared.
Yellow Lamp icon indicates that an error has appeared.
Green Lamp icon indicates a 'no trouble' situation.
Note that the same colors are also used for indication of status in other
contexts, e.g. in the display of test results.
Double-ringed icons with history informationDouble-ringed icons with history information
The Lamp icons are double-ringed, with the inner ring indicating the current
status and the outer ring showing history information (i.e. alarms and errors in
the alarm trap since the last reset/clearing of history).
'Error' situation currently, but alarm recorded previously.
'No trouble' situation currently, but alarm recorded previously.
'No trouble' situation currently, but error recorded previously.
To Next Page
Loading...
