Ring of the DC plug has holes and the power connector has protrusions on
outer surface. The DC plug locks to the power connecter when the protrusions
on the power connector fit into the holes on the DC plug ring.
When yellow markers are printed on both panel and DC plugWhen yellow markers are printed on both panel and DC plug
Check one of the yellow markers on the DC plug is aligned to the Lock marker
on the connector panel.
The DC plug is not locked unless the protrusions fit into the holes. The gap
between the ring and the panel becomes wider than when it is locked.
When yellow markers are not printed on panel and/or DC plugWhen yellow markers are not printed on panel and/or DC plug
The DC plug is not locked unless the protrusions fit into the holes. The gap
between the ring and the panel becomes wider than when it is locked.
3. Connect the AC plug of the AC adapter to the wall outlet.
CATIONCATION
Unless the DC plug is locked, it may come off when the Network Master isUnless the DC plug is locked, it may come off when the Network Master is
used.used.
If the DC plug of the AC adapter is connected with voltage applied to it,If the DC plug of the AC adapter is connected with voltage applied to it,
malfunction or damage may occur to the Network Master.malfunction or damage may occur to the Network Master.
To Next Page
Loading...
