TCPTCP
Touching the TCPTCP layer button displays the parameters available for the
Transmission Control Protocol layer.
Transmission Control Protocol is a core protocol of the Internet protocol suite.
It is the intermediate layer between the Internet Protocol below it and the
application above it. This protocol guarantees reliable and in-order delivery
from sender to receiver.
The Network Master supports sending frames that resemble TCP frames, but the
traffic transmitted will not constitute a real TCP stream, as no handshake is
performed.
TCP header is defined in RFC 793 as below.
Auto connectAuto connect
By enabling Auto connectAuto connect, it is possible to force the transmitter to establish a
TCP connection before the actual traffic frames are sent. This makes it possible
to pass a firewall/nat router from the inner side.
Listen modeListen mode
To Next Page
Loading...
