External InterfacesExternal Interfaces
Remote ControlRemote Control
Input deviceInput device
LCDLCD
LEDLED
Storage MemoryStorage Memory
PowerPower
Power consumptionPower consumption
Battery Charging TimeBattery Charging Time
OperatingOperating
temperature andtemperature and
humidity rangehumidity range
Storage temperatureStorage temperature
and humidity rangeand humidity range
G0406A OSFP 400GBASE-FR4
G0421A QSFP56 200GBASE-LR4
1212..11..22 Electrical Performance and FunctionElectrical Performance and Function
Internal Clock Accuracy ±4.6 ppm or less, STRATUM 3
compliant
Ext. Clock (Input) BITS (DS1 1.544 Mbit/s), SETS (E1 2.048 Mbit/s),
2MHz Clock, 10MHz Clock
ITU-T G.703 compliant
Connector BNC Jack
Range ±100 ppm
Service interface USB (A x 2, mini B x 1 Port, Revision 2.0)
RJ45 Ethernet (10/100/1000 BASE-T)
WLAN (2.4GHz/5GHz IEEE802.11a/b/g/n)
Bluetooth (BT2.1+EDR/3.0/4.2(BLE))
AUX Connector (for connection of optional G0325A
GPS receiver)
AUX I/O The interface is available by combining with J1705A
AUX Conversion Adaptor.
J1705A AUX Conversion Adaptor is a standard
accessory of the MU100090A or the MU100090B.
Ref 1PPS Input TTL 50Ω/DC
1PPS Input TTL 50Ω/DC
Ethernet, GPIB
Power button, Touch panel
9 inch display with WVGA resolution (800x480 pixels).
On, Standby, Charge
7 GB
1212..11..33 Environment PerformanceEnvironment Performance
DC 18 to 19 V, 22.2 A max.
AC 100 V to 240 V, 50/60 Hz
Battery Dedicated 11.25 V Rechargeable smart Li-ion battery
When using G0418A 250 W max.
When using G0419A
(with MT1040A-x20)
420 W max.
9 hours (at 25°C, typical)
0°C to +50°C, ≤85%RH (non-condensing)
Charging battery: 0°C to +40°C, ≤85%RH (non-condensing) *
*: The maximum allowed charging temperature will be reduced if the
instrument is switched on.
−30°C to +60°C, ≤90%RH (Excluding battery and AC adapter)
−20°C to +50°C, ≤90%RH (Including battery and AC adapter)
(non-condensing)
To Next Page
Loading...
