When two or more network interface cards are available, Use NetworkUse Network
InterfaceInterface selection appear. Click the field to select a interface.
2. Enter the IP address of the Network Master to Remote Unit IP AddressRemote Unit IP Address.
3. In Optional client Title TextOptional client Title Text, enter the name of the Network Master. This text
is displayed at the title bar of the Control Software and on the button in the
resource monitoring screen.
For example, when you enter 'Anritsu', you will see 'Anritsu' on the button in
the resource monitoring screen as shown in the figure below.
4. Click Validate ConnectionValidate Connection on the Control Software.
5. Clicking Launch ApplicationLaunch Application in ControlControl tab will display the Network Master
screen.
To Next Page
Loading...
