AOR AR-DV1 - Page 30

28
3. Rotate the dial knob to select set voice squelch function OFF or ON. (Default: OFF)
4. To select OFF, press the [ENT] key. It will return to normal display.
5. If ON is selected, press the [▼] key to select “DELAY” parameter in reverse contrast.
6. The DELAY parameter is to set the delay time before activating voice squelch in 0.1 second
increments. (Default: 020 --- 2 seconds)
7. Press the [▼] key to select “LEVEL” parameter in reverse contrast.
8. Rotate the dial knob to set voice level parameter (between 1 ~ 7 or OFF). (Default: 4)
9. To confirm entry, press the [ENT] key. Alternatively, press the [CLR] key to cancel entry.