SW Version 2.04 30-January-2009 Page 101 of 128
snmpwalk -m ALL -v 2c -c public <src ip address> appeartv
To send traps to ip address <dest ip address> First set the trap destination address:
snmpset -c private -m ALL -v 2c <src ip address> APPEARTV-TRAPDESTINATION-
MIB::tdIpAddr.1 a <dest ip address>
Then set the community string may be changed if needed to <new community
string>:
snmpset -c private -m ALL -v 2c <src ip address> APPEARTV-TRAPDESTINATION-
MIB::tdCommunityString.1 s <new community string>
Finally the entry must be activated with:
snmpset c private m ALL v 2c <src ip address> APPEARTV-TRAPDESTINATION-
MIB::tdRowStatus.1 i 1
To send the traps to stderr without forking the shell:
snmptrapd m ALL f Le
5.3 Soap XML Interface
The Soap XML interface can be used for external control and monitoring of the unit.
Please contact Customer Support for more information about this feature.
To Next Page
Loading...