SW Version 2.04 30-January-2009 Page 73 of 128
Id http://www.dvb.org/technology/standards/a005r4.tm1324r11.dTr101211
.V1.8.1.pdf
The TOT settings offer the possibility of configuring any future changes in time, such
as Summer Time and leap years, in two sections, Local Time Offset Change and Time
of Change. For more information, reference can be made to ETSI EN 300 468 v1.7.1
(2006-05) “Digital Video Broadcasting (DVB); Specification for Service Information
(SI) in DVB systems”. The following fields are displayed for the Local Time Offset
Change, which refer to the time reference:
Local Time Offset The time reference.
Next Time Offset The field allows change of time reference. This field is used to
express the actual time change in hours. For example,
Summer Time can be expressed as +1 hour.
The Time of Change is for setting the time the change will take place at. The fields
presented include:
Year The year of the next change
Month The month of the next change
Day The day of the next change
Hour The hour of the next change
Minute The minute of the next change
Second The second of the next change
Click Apply.
4.7.1.2 NorDig Logical Channel Descriptor Support
From the NorDig NorDig Rules of Operation.
“The logical_channel_descriptor is a privately defined descriptor (i.e. not DVB
specified) intended for use in cable, satellite and terrestrial networks. If used, this
descriptor shall be inserted in the second descriptor loop in NIT. The descriptor is used
to comply to the fact that some services are to the viewers related to a specific
channel position”.
The Logical Channel Descriptor (LCN) implementation in the SC2000 supports both
version 1 and version 2 of the LCN.
The LCN configuration is accessible via the edit field to the right of the NIT in the PSI
table’s base values dialog shown above. Press the edit field and the following dialog
will appear.
To Next Page
Loading...