SW Version 2.04 30-January-2009 Page 125 of 128
Error Code Alarm Level Description
QAM channel restarted,
packet dropped
CRITICAL The QAM module does not manage to synch properly to the
signal received from the internal IP-output card. This causes
the QAM module to restart the channel.
The reason could be either:
1)
No services are configured, such that only NULL packets are
sent to the QAM, hence the QAM does not find a PCR.
2)
The PCR that it receives is too jittery – which may happen
when the services being sent to the modulator has been
descrambled from an IPIN MPTS. If this is the case try to use
the Alt CAM descrambling mode for the services being
descrambled
To Next Page
Loading...