ASE2000 V2 Communication Test Set User Manual 5
10.3.4. Task Setup and Activation, Analog Control Tasks 73
10.3.5. Task Setup and Activation, File Transfer Tasks 75
10.4. Task Mode Operation, Monitor Mode 77
10.5. Task Mode Operation, RTU Simulation Mode 78
11. Remote Monitoring 80
11.1. Activation 80
11.1.1. SPT Remote Monitoring Conîš¿guration 80
11.1.2. ASE2000 Remote Monitoring Conîš¿guration 81
12. Project Saving 82
13. ASE2000 Cabling 83
13.1. RS-232 Connections 83
13.2. Master Simulation Mode – RS-232 83
13.2.1. RTU/IED Simulation Mode – RS-232 84
13.2.2. Monitor Mode – RS-232 84
13.3. Modem Connections 85
13.3.1. Master Simulation Mode – Modem Connection 85
13.3.2. RTU/IED Simulation Mode – Modem Connection 86
13.3.3. Monitor Mode – Modem Connection 87
14. ASE2000 Network Protocol Use 88
14.1. Master Mode 89
14.2. RTU Mode 90
14.3. Monitor Mode 90
15. ASE2000 V2 Command Line Options 92
16. ASE BELL-202 Dual-Channel Modem Adjustment 94
16.1. Adjusting Modems with White Colored Potentiometers 94
16.2. Adjusting Modems with Orange or Yellow Colored Potentiometers 95
17. RS-232 Cable And Adapter Pin-Out 96
17.1. DB-25 Connector PIN-OUT 96
17.2. DB-9 Connector PIN-OUT 96
17.3. DB-9 to DB-25 Adaptor 97
17.4. DB-25 Null Modem Adaptor (Standard) 97
17.5. DB-9 Null Modem Adaptor (Standard) 98
17.6. ASE RS-232 Monitor Adaptor Cable 98
18. ASE2000 Kit Contents 99
18.1. Model ASE2000-USB-M 99
18.2. Model ASE2000-USB-RS 99
18.3. Model ASE2000-COM 99
19. ASE2000 Kit Components 101
19.1. ASE dual channel BCOM-USB device with two RS-232 cables, USB cable, and
BCOM-USB to ASE 2-Channel Modem power cable. 101
19.2. ASE Bell-202/CCITT V.23 Dual-Channel Modem 101
19.3. DB-25 Female-Female Gender Changer 102
19.4. DB-9 to DB-25 adapter 102
To Next Page
Loading...
Need help?
General
