APRILIA RSV4 Factory a-PRC 2009 User Manual

•
Remove the flywheel cover.
•
Block flywheel rotation using the spe-
cific tool.
•
Unscrew and remove the screw.
Specific tooling
020848Y Flywheel retainer (Mitsubishi)
020914Y Flywheel retainer
•
Remove the tool for blocking flywheel
rotation.
•
Insert a TCEI M10x20 screw into the
crankshaft hole, which will act as a
mounting base for flywheel extraction.
•
Remove the flywheel using the specific
extractor.
•
Collect the TCEI M10x20 screw.
Specific tooling
020847Y Flywheel extractor (Mitsubishi)
020913Y Flywheel extractor (Kokusan)
See also
Removing the flywheel cover
Inspecting the cover components
•
Unscrew and remove the three Blow-
by system fitting screws.
•
Remove the Blow-by system fitting.
•
Replace the O-ring with a new one of
the same type
RSV4 Factory a-PRC Engine
ENG - 287

APRILIA RSV4 Factory a-PRC 2009 Specifications

General

Brand	APRILIA
Model	RSV4 Factory a-PRC 2009
Category	Motorcycle
Language	English