- Lower marking = Min. level
•
If this is not the case, top-up the oil im-
mediately through the filler plug.
CAUTION
NEVER ALLOW THE OIL LEVEL TO DROP BELOW THE
MINIMUM LEVEL OR FILL ABOVE THE MAXIMUM LEVEL;
IF YOU DO NOT COMPLY WITH THE MINIMUM AND MAX-
IMUM OIL LEVELS THE ENGINE COULD BE SERIOUSLY
DAMAGED
Replacement
NOTE
HOT OIL IS MORE FLUID AND WILL DRAIN OUT MORE EASILY AND COMPLETELY.
•
Place a container with suitable capaci-
ty under the drainage plug.
•
Unscrew and remove the drainage
plug.
•
Unscrew and remove the filler cap.
•
Drain the oil into the container; allow
several minutes for oil to drain out com-
pletely.
•
Check and, if necessary, replace the
drainage plug sealing washers.
•
Screw and tighten the drainage plug.
•
Add 4 l (0.88 UK gal) of new engine oil
of the specified type.
•
Screw on the filler cap.
Maintenance RSV4 Factory a-PRC
MAIN - 64