APRILIA RSV4 Factory a-PRC 2009 User Manual

•
Unscrew and remove the two screws
fixing the left rider footrest plate to the
chassis.
•
If necessary, you can loosen and re-
move the quick-shift fixing screw to
change the O-rings.
NOTE
NOTE THE CABLE HARNESS DOES NOT NEED TO BE
DISCONNECTED FOR THIS OPERATION
Side fairings
The following procedure is relative to a single fair-
ing, but is applicable to both.
•
Remove the lower side fairing.
•
Unscrew and remove the three screws.
•
Release the insert on the retainer with
the duct.
RSV4 Factory a-PRC Bodywork
BODYW - 497

APRILIA RSV4 Factory a-PRC 2009 Specifications

General

Brand	APRILIA
Model	RSV4 Factory a-PRC 2009
Category	Motorcycle
Language	English