Vehicle identification
SERIAL NUMBER LOCATION
These numbers are necessary for vehicle registration.
NOTE
ALTERING IDENTIFICATION NUMBERS MAY BE SERIOUSLY PUNISHABLE BY LAW. IN PAR-
TICULAR, MODIFYING THE FRAME NUMBER IMMEDIATELY VOIDS THE WARRANTY.
This number consists of numbers and letters, as in
the example shown below.
ZD4RKB000YSXXXXXX
KEY:
ZD4: WMI (World manufacturer identifier) code;
RK: model;
B00: version variation;
0: free digit
Y year of manufacture
S: production plant (S= Scorzè);
XXXXXX: serial number (6 digits);
CHASSIS NUMBER
The chassis number is stamped on the right hand
side of the headstock.
ENGINE NUMBER
The engine number is printed on the base of the
engine crankcase, left hand side.
Engine No. ....................
Dimensions and mass
DIMENSIONS
Specification
Desc./Quantity
Max. length 2040 mm (80.31 in)
Max. width (at handlebar) 735 mm (28.94 in)
Max. height (to windshield) 1120 mm (44.09 in)
Saddle height 847 mm (33.35 in)
Wheelbase 1420 mm (55.90 in)
Minimum ground clearance 130 mm (5.12 in)
Dry weight 189 kg (417 lb)
Kerb weight 200 kg (441 lb)
Full loaded weight (rider only) 275 kg (441 lb)
RSV4 Factory a-PRC Characteristics
CHAR - 11
To Next Page
Loading...
Need help?
General
