APRILIA RSV4 Factory a-PRC 2009 User Manual

Disassembling
•
Remove the steering assembly com-
pletely.
•
Unscrew and remove the lower dowel
fastening the collar.
•
Remove the lower collar.
•
Unscrew and remove the upper dowel
fastening the collar.
•
Remove the upper collar.
CAUTION
ALWAYS CHANGE BOTH COLLARS (UPPER AND LOW-
ER).
NOTE
FROM MY2011:
Upper and lower collars are not interchangeable.
To identify them, check the number printed on them:
•
lower collar 0.3+5.5
•
upper collar 0.3+4.5
Assembling
•
Fit the upper collar.
•
Partially tighten the dowel in the rela-
tive threaded hole, so that it protrudes
by no more than 2 or 3 mm into the
conical surface.
•
Fit the bushing in its seat, ensuring that
the seal (in the groove in the bushing)
remains in place.
•
Press the bushing into place with a rub-
ber mallet.
•
Tighten the dowel to the specified tor-
que.
Suspensions RSV4 Factory a-PRC
SUSP - 422

APRILIA RSV4 Factory a-PRC 2009 Specifications

General

Brand	APRILIA
Model	RSV4 Factory a-PRC 2009
Category	Motorcycle
Language	English