APRILIA RSV4 Factory a-PRC 2009 User Manual

REAR EXHAUST MANIFOLDS
•
Remove the catalytic converter.
•
Remove the left rider footpeg.
•
Unscrew and remove the four nuts fas-
tening the rear exhaust manifolds and
retrieve the washers.
•
Remove both rear exhaust manifolds.
Butterfly valve in exhaust
To check correct operation and calibration of the exhaust valve, see electrical system section.
REMOVING THE EXHAUST THROTTLE VALVE
•
Remove the fairing lug.
•
Disconnect the connector from the
valve actuator motor.
See also
Lower cowl
Chassis RSV4 Factory a-PRC
CHAS - 456

APRILIA RSV4 Factory a-PRC 2009 Specifications

General

Brand	APRILIA
Model	RSV4 Factory a-PRC 2009
Category	Motorcycle
Language	English