Arkray ADAMS A1C HA-8180V - Page 123

HA-8180V 3-16
Chapter 3 Auxiliary Operations
d Press .
• If <All> is selected for <Range of results>, printing/transmission will start.
• If another option is selected for <Range of results>, go to step e.
e Set the range of measurement results to print/transmit according
to the option set in <Range of results>.
When <Meas. No.> is selected:
• Set a range of measurement numbers.
• Settable range:0000 to 9999
• button: Moves the cursor from the start number to the
end number.
When <Port No.> is selected:
• Set a range of port number.
• Settable range: 0000 to 9999
When <ID> is selected:
• Enter an ID.
• See “ Entering IDs” on page 1-44.
• IDs can also be entered with the optional hand-held barcode
reader.
Setup item Description (default bolded)
Date (DD-MM-YY) Set a range of measurement dates. The end (right) date must be the same as or later than
the start (left) date.
Settable range: 01-01-00 to 31-12-99
Measurement Select the type of measurement from:
Normal & STAT measurements, All, Normal measurement, STAT measurement,
Control measurement
Results Select the type of results from:
All: All results
Normal results only: Normal results only
Include abnormal results: Normal and abnormal results
(Results for misread barcodes are not included.)
Barcode misread: Barcode misread results only
Range of results Select how you want to specify a range of results from:
All: All results, Meas. No.: Measurement number
Port No.: Port number, ID: ID
Measurement mode Select one or both of the measurement modes for which to print/transmit results. The default
is the current measurement mode.
Variant: Variant mode
Fast: Fast mode
Variant & Fast: Both modes
REFERENCE:
 If “None found.” appears on the display:
No match is found in the memory. Press to return to the screen shown in step c.
 Press or to stop printing/transmission.
OK
OK
Stop
Print
(4100) 10-06-2010 10:00
Meas. No.
<0000> - <9999>
Print
(4100) 10-06-2010 10:00
Port No.
<0000> - <9999>
Print
(4100) 10-06-2010 10:00
ID
< >