Descriptions
USER MANUAL
Ascom d83 DECT Handset
Table 1 Status and system icons description (continued)
Silent volume Indicates that the ring signal has been muted. The icon appears in
the Status bar when the ring volume is set to Silent.
Bluetooth Indicates that Bluetooth is enabled. The icon appears in the Header
bar.
Bluetooth headset Indicates that a Bluetooth headset is connected to the handset. The
icon appears in the Header bar.
Headset Indicates that a corded headset is connected to the handset. The
icon appears in the Header bar.
Key lock Indicates a locked keypad. The icon appears in the Status bar.
Phone lock Indicates a locked handset. The icon appears in the Status bar.
Man-down alarm Indicates that the Man-down alarm function is enabled. The icon
appears in the Active area.
Note: Available only for Protector.
No-movement alarm Indicates that the No-movement alarm function is enabled. The icon
appears in the Active area.
Note: Available only for Protector.
Pull-cord alarm Indicates that the Pull-cord alarm function is enabled.
Note: Available only for Protector.
Profile active Indicates that a profile is active. The icon appears on the left lower
part of the Active area.
PDM sync Indicates that the handset is communicating with WinPDM/Device
Manager via Desktop Programmer.
Menu icons
The "Contacts" menu contains all names/numbers in Contacts. In addition, a company
phonebook with up to 1000 entries can be downloaded to the phone via the WinPDM. A
central phonebook
1
. can also be accessed from the "Contact" menu.
The "Services" menu contains menu shortcuts used to customize an own menu.
The “Messaging” menu contains all message handling such as reading and writing
messages.
The "Calls" menu contains call lists, call time, and call services
1
. Call services is configured
in the WinPDM/Device Manager.
The “Connections” menu contains Bluetooth connection, headset selection, System
selection, and In charger selection.
10 TD 93434EN / 01 December 2021 / Ver. B
To Next Page
Loading...
Need help?
General
