ashtech DG16 - Page 244

224 DG14 and DG16 Board & Sensor Reference Manual
Position Information
$PASHS,NME,GGA Enable or disable 3-D position
response message
FUL 233
$PASHQ,GGA Query 3-D position message 234
$PASHS,GGA Set the GGA message format 233
$PASHS,NME,GLL Enable or disable latitude/longitude
message
236
$PASHQ,GLL Query latitude/longitude message 237
$PASHS,NME,GXP Enable or disable horizontal position
message
250
$PASHQ,GXP Query horizontal position message 250
$PASHS,NME,POS Enable or disable NMEA position
response message
265
$PASHS,NME,RMC Enable or disable minimum position,
course/speed message
268
$PASHQ,RMC Query for minimum position, course/
speed message
268
Receiver
Configuration
$PASHS,NME,CRT Enable or disable Cartesian
coordinates message
229
$PASHQ,CRT Query Cartesian coordinates
message
230
$PASHS,NME,GDC Enable or disable Grid coordinates
message
231
$PASHQ,GDC Query Grid coordinates message 231
$PASHS,NME,UTM Enable or disable Universal
Transverse Mercator (UTM)
coordinates message
279
$PASHQ,UTM Query Universal Transverse Mercator
(UTM) coordinates message
280
Time and Date
$PASHS,NME,PTT Enable or disable pulse time tag
message
270
$PASHQ,PTT Query pulse time tag information 270
$PASHS,NME,ZDA Enable or disable time and date
message
285
$PASHQ,ZDA Query time and date information 285
Table 8.1. NMEA Data Message Commands (Continued)
Command Description Default Page