Atmel ATmega128 User Manual

271
2467S–AVR–07/09
ATmega128
Notes: 1. PRIVATE_SIGNAL1 should always scanned in as zero.
2. PRIVATE_SIGNAL2 should always scanned in as zero.
31 PA6.Control Port A
30 PA6.Pullup_Enable
29 PA5.Data
28 PA5.Control
27 PA5.Pullup_Enable
26 PA4.Data
25 PA4.Control
24 PA4.Pullup_Enable
23 PA3.Data
22 PA3.Control
21 PA3.Pullup_Enable
20 PA2.Data
19 PA2.Control
18 PA2.Pullup_Enable
17 PA1.Data
16 PA1.Control
15 PA1.Pullup_Enable
14 PA0.Data
13 PA0.Control
12 PA0.Pullup_Enable
11 PF3.Data Port F
10 PF3.Control
9 PF3.Pullup_Enable
8PF2.Data
7PF2.Control
6 PF2.Pullup_Enable
5PF1.Data
4PF1.Control
3 PF1.Pullup_Enable
2PF0.Data
1PF0.Control
0 PF0.Pullup_Enable
Table 106. ATmega128 Boundary-scan Order (Continued)
Bit Number Signal Name Module

Atmel ATmega128 Specifications

General

Brand	Atmel
Model	ATmega128
Category	Microcontrollers
Language	English