405 and 405HD IP Phone
User's Manual 24 Document #: LTRT-12045
4.2 Selecting Ring Tone
The phone provides a selection of ring tones that you can choose from to indicate incoming calls.
If line extensions are defined on your phone, you can assign a ring tone per line extension.
To select a ring tone:
1. Access the Ring Tone screen (MENU key > Settings > Ring Tone).
2. In the Ring Tone screen, select All Extensions, or select Extension 1 or Extension 2 (if
extensions are configured).
3. Navigate to a ring tone of your choice. A sample of each ring tone is played as you navigate
through the list.
4. Press the - or + key on the keypad to set ring tone volume. You can also increase or
decrease ring tone volume when the phone is in idle state or when a call is incoming (see
Section 4.9.1).
A few seconds after adjusting the volume level, the Ringer Volume indication is hidden.
5. Press the Select softkey.
6. Press the Save softkey to apply your setting.
To Next Page
Loading...
