405 and 405HD IP Phone
User's Manual 54 Document #: LTRT-12045
6.7 Hosting 3
Way Conference Calls
You can make a 3-way conference call with two other parties.
To make a 3
way conference call:
1. Call the first participant; the call is established:
2. Press the Conf softkey; the CONFERENCE WITH…screen is displayed.
3. Enter the number of a second participant, and then press the Dial softkey. When the second
participant answers, a call is established.
4. Press the Conf softkey again; a 3-way conference call is established and the names of all
participants are displayed on the screen.
5. To end the conference call, hang up the phone or press the End softkey.
6.7.1 Leaving a 3-Way Conference You Set up without Disconnecting the
Others
A caller who sets up a three-way conference call with two other parties can leave it without
disconnecting the two other parties. The two others continue uninterrupted. The 'Drop from
Conference' feature supports this capability.
To leave a conference you set up, without disconnecting the other parties:
Press the Transfer softkey; you're disconnected from the conference; the two remaining
parties continue unaffected.
Note: The initiator of a call conference can also drop out of the conference by on-hooking the
phone, without disrupting parties B and C. In a conference call initiated by user A with
participants B and C, user A can on-hook to drop out, and B and C can continue talking
uninterruptedly.
6.8 Muting Calls
You can mute the microphone of the handset, headset, or speakerphone during a call so that the
other party cannot hear you. While the call is muted you can still hear the other party. Muting calls
can also be used during conference calls.
To mute/unmute a call:
1. During a call, press the MUTE key.
2. To unmute, press the MUTE key again and resume the conversation.
Note: The network administrator can disable the mute key. See the Administrator's Manual
for more information.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
