405 and 405HD IP Phone
User's Manual 58 Document #: LTRT-12045
6.12 Logging into a Remote HTTP/S Server
When downloading a new configuration file from the provisioning server you can be prompted to
enter the provisioning server login credentials (username and password).
You can configure this feature.
The feature may be useful (for example) when provisioning and attempting to download a
configuration file from the provisioning server. In this case the server's authentication process
recognizes that an HTTP username and/or password has not been specified or that these
credentials are incorrect. The 'Prov. Credentials' screen then pops up prompting you to enter or
reenter these login credentials.
Note: This feature is only available when the 'ui_interaction_enabled' configuration file
parameter is enabled. See the Administrator's Manual for more information. When the
parameter is not enabled, the 'Prov Credentials' option does not appear in the Settings menu
on the phone.
You can also manually set the remote server login credentials.
To manually set remote server login credentials:
1. Open the
Prov. Credentials screen (MENU key > Settings > Prov. Credentials):
2. In the 'User name' field, enter the HTTP/S username.
3. In the 'Password' field, enter the HTTP/S password.
4. Press the now-enabled OK softkey to confirm, or press the Clear softkey to clear entered
characters, or the Skip softkey to return to the previous menu.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
