405 and 405HD IP Phone
User's Manual 34 Document #: LTRT-12045
3. In the 'Modify contact' screen that opens (shown above), enter the ‘Name’ of the new contact
(see Section 3.4 on page 20 for information on alphanumeric modes).
4. Navigate down and key in the new contact's ‘Office’ number (see Section 3.4 on page 20 for
information on alphanumeric modes):
• Optionally, navigate down and enter the new contact's ‘Home’ and ‘Mobile’ numbers.
5. Press the Sp. Dial softkey to assign this contact to a speed dial key if required, and in the
Assign to Speed Dial screen that opens, navigate to an Empty, for example to 1. Empty:
6. Press the Select softkey or the OK key on the phone; the contact is assigned to phone key
1.
7. Press the Save softkey to save the configured contact's information.
8. To view and edit a speed dial key, open the Personal Directory and navigate to the contact
whom you assigned to the speed dial key, and then press the Detail softkey; in the 'Contact
details' screen that opens, navigate down to the configured speed dial and press the Edit
softkey:
9. Navigate down to the contact's number and press the Clear softkey to modify the number.
Press the Sp.Dial softkey to reassign the contact to another speed dial key if required.
10. To test the speed dial key to which you assigned the contact, long-press the key; the phone
of the contact to whom you assigned the speed dial key, is dialed.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
