Avaya 9600 Series Instruction Manual

• Priority softkey: Visible only when it is configured with the appropriate system parameter.
• Main Menu.
• Options & Settings menu.
Making a precedence call by using dial plan configuration
About this task
Use this procedure to make a precedence call manually by dialing the extension number.
Before you begin
Ensure that the Dial plan is configured on the Local Session Controller or Enterprise Session
Controller with the Feature Access Code (FAC).
Procedure
1. Lift the handset or press one of the following:
• Speaker
• Headset
• Corresponding line button
2. Dial the FAC followed by the extension number.
Making a precedence call by using Priority softkey
Before you begin
Ensure that the Priority softkey is enabled by your administrator.
Procedure
1. Press Priority softkey on the idle line appearance.
2. Select the precedence level on the Precedence Selection screen.
3. Dial the extension manually.
You can also select redial softkey or autodial from the System Number screen.
Making a precedence call by using the Main menu
Procedure
1. Press Main menu.
2. Select .
3. On the Precedence Selection screen, select the precedence level.
Handling outgoing calls
October 2019 Using Avaya 9601 IP Deskphone SIP 37
Comments on this document? infodev@avaya.com

Avaya 9600 Series Specifications

General

Brand	Avaya
Model	9600 Series
Category	IP Phone
Language	English