Basic Migration Steps
Issue 2.1 June 2006 895
Presite migration checklist
Before you go on site, complete the following tasks:
Verify that you have the
appropriate logins and
passwords to access the
media servers and server
complex components.
When you have finished installing the authentication
file, Communication Manager will have a password for
all Avaya logins, including craft. This password is
unique to the media server of the customer. You can
use the password the next time you log in as craft,
provided you access the media server through the
Services port. You do not need an ASG challenge/
response to log in this way, even though every other
means of craft access still requires an ASG challenge/
response.
This unique craft password remains valid until a new
authentication file is installed.
Copy the translation file
from STS to a directory on
the Services laptop.
File size usually is in the range of 1-4 megabytes.
9
Task Description
2 of 2
9
Task Description
Verify that the voice network,
dial plan, and E911 for remote
locations were redesigned.
Perform this task only if applicable.
Verify that all existing circuit
packs work with the new
system.
Check the Minimum Vintage Table. Go to the
Hardware and Software Compatibility Matrix at ftp//
ftp.avaya.com/incoming/Up1cku9/tsoweb/media/
minhardwarevintages.pdf.
Replace any TN799B/C C-LAN
circuit packs.
Replace with the TN799DP circuit pack.
Replace the 259A adapter and
the CAT3 cable.
Replace with the cable extender adapter with
Comcode 848525887 and the CAT5 or better cable.
Replace TN570 EI circuit packs. Replace with TN570B vintage 7 or later circuit packs.
To Next Page
Loading...
Need help?
General
