Migrating from an S8700 Media Server to an S8710 Media Server
930 Upgrading, Migrating, and Converting Media Servers and Gateways
Backing up files on the media server
To back up files on the media server:
1. Under Data Backup/Restore, click Backup Now.
2. Select the data sets and the backup method.
Select Save ACP translations prior to backup to save the translations to the hard disk
before saving it to the backup media or network of the customer.
3. Click Start Backup to start the back up process.
Releasing alarm suppression (optional)
If you complete the migration well before the time set when you suppressed alarming, you might
want to release alarm suppression manually rather than wait.
1. Use the PuTTY application to reaccess the server using the secure shell (SSH) protocol.
2. Log in as craft or dadmin.
3. Type almsuppress -n. Press Enter to release alarm suppression.
4. Log off.
Setting the Product ID
Note:
Note: The Product ID is different from the Product ID on the S8700 Media Server.
To set the Product ID:
1. Click Start > Run to open the Run dialog box.
2. Type telnet 192.11.13.6. Press Enter.
3. Log in as craft or dadmin.
4. At the prompt type productid -p number where product_id is the Product ID that you
received from the customer or the ART tool. Press Enter.
Logging off all administration applications
When you complete all the administration, log off all the applications that you used.
To Next Page
Loading...
Need help?
General
