Avaya Vantage - Page 147

Parameter Type Default
value
Is set to
default
on reset
Description
The maximum value of the range is calculated as a
sum of the RTP_PORT_LOW and
RTP_PORT_RANGE values.
For provisioning, use the SET command in the
46xxsettings.txt file.
SRTP parameters
Parameter Type Default
value
Is set to
default
on reset
Description
MEDIAENCRYPTI
ON
String 1,2,9 Yes Specifies which media encryption options are
supported.
The value of the parameter is a list of up to 3
options, which must be separated by commas. The
following options are available:
• 1: aescm128–hmac80
• 2: aescm128–hmac32
• 9: none
• 10: aescm256–hmac80
• 11: aescm256–hmac32
For provisioning, use the SET command in the
46xxsettings.txt file.
ENCRYPT_SRTCP Numeric 0 Yes Specifies whether RTCP packets are encrypted.
SRTCP is only used if encryption is enabled using
MEDIAENCRYPTION.
Assign one of the following values:
• 0: SRTCP is disabled.
• 1: SRTCP is enabled.
For provisioning, use the SET command in the
46xxsettings.txt file.
Avaya Breeze
™
CSDK parameters
May 2018 Installing and Administering Avaya Vantage
™
147
Comments on this document? infodev@avaya.com